SPECIFICATION |
|||||
| Type No. | WCF 12 / WCF 25 M | WCF 25 / WCF 33 / WCF 40/ WCF50 M | WCF 50 / WCF 100 M | WCF 100 / WCF 200 M | WCF 200 / WCF 300 M |
| Rated Power at 70’C | 0.125 W / 0.25 W | 0.25 W / 0.40 W / 0.50 W | 0.50 W / 1 W | 1 W / 2 W | 2 W / 3 W |
| Resistance Range (E 24 series) | 0.1 E to 10 Meg | 0.1 E to 10 Meg | 0.1 E to 10 Meg | 0.1 E to 10 Meg | 0.1 E to 10 Meg |
| Tolerance | ± 5% | ± 5% | ± 5% | ± 5% | ± 5% |
| Maximum working voltage at 70’c at normal air pressure | 200V | 250V | 350V | 500V | 500V |
| Maximum Over Load Voltage | 400V | 500V | 700V | 1000V | 1000V |
| Operating Temperature Range | -40ºC to + 150ºC | -40ºC to + 150ºC | -40ºC to + 150ºC | -40ºC to + 150ºC | -40ºC to + 150ºC |
| Dielectric Strength | 400V No break downΔR.max. ± 0.5% | 500V No break downΔR.max. ± 0.5% | 700V No break downΔR.max. ± 0.5% | 1000V No break downΔR.max. ± 0.5% | 1000V No break downΔR.max. ± 0.5% |
CARBON FILM RESISTORS
The WCF Series Carbon Film Resistors are manufactured using mechanised high vacuum carbonising plants. This ensures a stable resistive film. The resistors are insulated with layers of light brown lacquer. The WCF series offer a wide range of power ratings (0.125 W, 0.25W, 0.4W, 0.5W, 1W, 2W & 3W) with a tolerance of ± 5%. and TCR ±1000 ppm/ºC.
Description
Reviews (0)
Shipping & Delivery
CHARACTERISTICS
CHARACTERISTICS |
||||||
| Terminal Strength | no damage Δ R max. ± 0.5% |
|||||
| Resistance to soldering heat (350ºC) | Δ R max. ± 1% | |||||
| Solderability | good tinning no damage |
|||||
| Temperature Cycling -40 ºC to ± 150 ºC |
Δ R max. ± 1% | |||||
| Life 1000 hours at Rated Power | Δ R max. ± 3% | |||||
| Short time overload | Δ R max. ± 1% | |||||
| Resistance to solvents | no damage | |||||
STANDARD
E 24 Series
| 10 | 11 | 12 | 13 | 15 | 16 | 18 | 20 | 22 | 24 | 27 | 30 |
| 33 | 36 | 39 | 43 | 47 | 51 | 56 | 62 | 68 | 75 | 82 | 91 |
DIMENSIONS (in mm)
| TYPE WCF 12 / WCF 25M | H = 26 ± 2 | L = 3.3 ± 0.2 | D = 1.7 ± 0.1 | d = 0.45 ± 0.05 |
| TYPE WCF 25 / WCF 33 / WCF 40M/ WC 50M | H = 26 ± 2 | L = 6.0 ± 0.4 | D = 2.2 ± 0.1 | d = 0.50 ± 0.05 |
| TYPE WCF 50 / WCF 100M | H = 26 ± 2 | L = 9.0 ± 0.5 | D = 3.2 ± 0.2 | d = 0.55 ± 0.05 |
| TYPE WCF 100 / WCF 200M | H = 26 ± 2 | L = 11 ± 1.0 | D = 4.3 ± 0.5 | d = 0.65 ± 0.05 |
| TYPE WCF 200 / WCF 300M | H = 26 ± 2 | L = 15 ± 1.0 | D = 5.0 ± 0.5 | d = 0.75 ± 0.05 |
| Colour | lst figure | 2nd figure | Multiplier | Tolerance |
|---|---|---|---|---|
| Black | 0 | 0 | 1 | |
| Brown | 1 | 1 | 10 | ± 1% |
| Red | 2 | 2 | 100 | ± 2% |
| Orange | 3 | 3 | 1,000 | |
| Yellow | 4 | 4 | 10,000 | |
| Green | 5 | 5 | 100,000 | ± 0.5% |
| Blue | 6 | 6 | 1,000,000 | ± 0.25% |
| Violet | 7 | 7 | 10,000,000 | ± 0.1% |
| Gray | 8 | 8 | ||
| White | 9 | 9 | ||
| Gold | 0.1 | ± 5% | ||
| Silver | 0.01 | ± 10% |
Related products
LOW OHM CURRENT SENSING RESISTORS CERAMIC ENCASED
The WCSB/WCST/WCSV low ohm current sensing resistors are manufactured with high purity Ni-Cr/Cu-Ni element. These are ceramic encased resistors. WATTS offers these resistors ranging from 2mΩ to 50mΩ, having power rating from 2W to 10W.
- WCSB is axial type ceramic boat encased resistor.
- WCSV is vertical type ceramic boat encased resistor.
- WCST is axial type ceramic tube encased resistor.
METAL FILM RESISTORS
The WMF series Metal Film Resistors are manufactured using the latest Magnetron Vacuum Sputtering System. This ensures a very stable resistive medium having a very low temperature coefficient. The resistors are insulated with layers of light blue lacquer. The WMF series offer a wide range of power rating (0.125W, 0.25W, 0.40W, 0.50W, 1W, 2W & 3W), tolerances (0.1%, 0.5%, 1%, 2%, 5%) and TCRs (15, 25,50 & 100 ppm/ºC)
AUTOMOTIVE GRADE THICK FILM CHIP RESISTORS
The CR-A series Automotive Grade Thick Film Chip Resistors are manufactured by screening a metal glaze layer on a high grade ceramic body. The different resistance values are obtained by using different compositions of metal glaze. The end contacts are made to ensure optimum solderability and terminal strength. The resistive layers are given a non-flammable protective coating. The CR-A series is AEC-Q200 compliant.
The CR-A series offer a wide range of power ratings from 1/20W to 1W and are available in tolerance ranges of ±1% and ±5% with insulation Resistance ? 1000M?. Miniature size, excellent mechanical strength and electrical stability ensures reduced costs and enhances dependability.
WIRE WOUND FUSIBLE RESISTORS
The WWF series wire wound fusible resistors are manufactured to perform as a regular resistor under normal conditions and as a fuse under excessive load. In WWF series, resistors up to 5W, the resistance value is colour coded with 3 bands plus a tolerance band. An additional white band indicates that the resistor is fusible. For resistors 6W and above, the value is printed on the resistor.
METAL OXIDE FLAME PROOF RESISTORS
The WMO series Metal Oxide Film Resistors are manufactured using the latest technology to ensure a very stable resistive medium. The resistors are insulated with layers of flame proof epoxy. The WMO series offer a wide range of power rating (0.25W, 0.50W, 1W, 2W & 3W) having tolerance ranges of ±1 % & ±5 %
METAL GLAZE RESISTORS
The WMG Series Metal Glaze Resistors are manufactured with the latest sintering process to get the most stable thick metal glaze film. The resistors are insulated with light blue lacquer. WMG series offers a wide range of power rating (0.25W, 0.50W, 1W & 2W) in tolerance ±1% and ±5% with TCR less than 100 ppm/ºC
Reviews
There are no reviews yet.