HVM CZR SERIES – HIGH VOLTAGE MODULES FOR SMALL APPLIANCES

250.00
The HVM CZR is cost-effective, high performance solution for primary-secondary ground separation as well as protection of components from surges and spikes on communication lines. Cable Set-top boxes, Fax Machines and Key Telephones are ideal applications for the HVM CZR.
  • WIDE VOLTAGE RANGE
  • LONG SURGE LIFE
  • LOW CLAMPING VOLTAGE
  • FAST RESPONSE
  • LOW CAPACITANCE
  • HIGH INSULATION RESISTANCE
  • NO THERMAL RUNAWAY

LED CHIP RESISTOR

250.00
TECHNICAL SPECIFICATION :- Packing:Tape on reel Tolerance:±1%, ±5% Resistance Value Range:1 OHM – 100 MEG OHM HKR products comply with

LOW OHM CURRENT SENSING RESISTORS CERAMIC ENCASED

The WCSB/WCST/WCSV low ohm current sensing resistors are manufactured with high purity Ni-Cr/Cu-Ni element. These are ceramic encased resistors. WATTS offers these resistors ranging from 2mΩ to 50mΩ, having power rating from 2W to 10W.
  • WCSB is axial type ceramic boat encased resistor.
  • WCSV is vertical type ceramic boat encased resistor.
  • WCST is axial type ceramic tube encased resistor.

LOW OHM CURRENT SENSING RESISTORS OPEN FRAME

The WCSOA/WCSOR/WCSOV low ohm current sensing resistors are manufactured with high purity Ni-Cr/Cu-Ni element. These are open type resistors. WATTS offers these resistors ranging from 2mΩ to 20mΩ, having power rating from 2W to 10W.
  • WCSOA is axial type resistor.
  • WCSOR is radial pre-formed type resistor.
  • WCSOV is PCB mounting shunt type resistor.

LOW OHM CURRENT SENSING THICK FILM CHIP RESISTOR

The RS series low ohm current sensing thick film chip resistors are manufactured with Ruthenium-base which gives low inductance, high current capability.
Alumina Substrate Edge Electrode W (mm)
Bottom Electrode Barrier Layer Primary Overcoat
Top Electrode External Electrode Secondary Overcoat

MB 230V

250.00
TECHNICAL SPECIFICATION :- Parameters Value Minimum Sound Level 100 db Oscillation Frequency 4KHz ± 500Hz Current Consumption Maximum 20mA Operating

MB20

250.00
TECHNICAL SPECIFICATION :- Parameters Value Minimum Sound Level 85 db Oscillation Frequency 4KHz ± 500Hz Current Consumption Maximum 15mA Operating

MB20L

250.00
TECHNICAL SPECIFICATION :- Parameters Value Minimum Sound Level 95 db Oscillation Frequency 4KHz ± 500Hz Current Consumption Maximum 20mA Operating

MB27

250.00
TECHNICAL SPECIFICATION :- Parameters Value Minimum Sound Level 85 db Oscillation Frequency 4KHz ± 500Hz Current Consumption Maximum 15mA Operating

MB27A

250.00
TECHNICAL SPECIFICATION :- Parameters Value Minimum Sound Level 85 db Oscillation Frequency 4KHz ± 500Hz Current Consumption Maximum 15mA Operating

MB27AP

250.00
TECHNICAL SPECIFICATION :- Parameters Value Minimum Sound Level 85 db Oscillation Frequency 4KHz ± 500Hz Current Consumption Maximum 15mA Operating

MB27F

250.00
TECHNICAL SPECIFICATION :- Parameters Value Minimum Sound Level 85 db Oscillation Frequency 4KHz ± 500Hz Current Consumption Maximum 20mA Operating