SPECIFICATION |
|||||||||
| Type | Wattage | DIMENSIONS IN MM | Range in OHMS [Ω] | Tolerance | Dielectric withstanding Voltage | ||||
| D | L | H | d | ||||||
| WWN 1 | 1 | 3.20 ±0.5 | 9 ±0.5 | 27 ±1.0 | 0.60 ± 0.02 | 0.1 | 60 | 5% | 350 V |
| WWN 2 | 2 | 4.25 ± 0.5 | 11 ± 1.0 | 27 ± 1.0 | 0.65 ± 0.02 | 0.1 | 60 | 5% | 500 V |
| WWN 3/ WWN 4 | 3/4 | 5 ±0.5 | 15 ± 1.0 | 27 ±1.0 | 0.75 ± 0.05 | 0.1 | 220 | 5% | 500 V |
| WWN 5 | 5 | 6 ± 0.5 | 18 ± 1.0 | 30 ± 1.0 | 0.75 ± 0.05 | 0.1 | 600 | 5% | 500 V |
| WWN 6/ WWN 7/ WWN 8 | 6/7/8 | 8 + 1.0 | 25.00 ± 1.0 | 38 ±3.0 | 0.80 ± 0.05 | 0.1 | 1K | 5% | 500 V |
| WWN 9 / WWN 10 | 9/10 | 8± 1.0 | 30 ± 1.0 | 38 ±3.0 | 0.80 + 0.05 | 0.1 | 1 K | 5% | 1000 V |
WIRE WOUND RESISTORS – NON INDUCTIVE
The WWN series wire wound resistors – non inductive have very low inductance (less than 1µH), high heat dissipation and low TCR. The resistors are coated using layers of Flame Proof Epoxy with axial lead wire. In WWN series, resistors up to 5W, the resistance value is color coded with 3 bands plus a tolerance band. An additional yellow band indicates that the resistor is Non Inductive. For resistors 6W and above, the value is printed on the resistor.
Description
Reviews (0)
Shipping & Delivery
ELECTRICAL PERFORMANCE
| Tests | Condition | Spec |
| Resistance Temp. Coeff. | -55°C ~ 200°C | ± 200 ppm/°C |
| Short Time Overload | 5 times of rated wattag e for 5 sec for upto 3w10 times of rated wattage for 5 sec. above 3w | ±2% |
| Rated Load | Rated voltage for 30 min. | ± 0.5% |
| Insulation Resistance | 500 V megger | 1,000MΩ |
| Load Life | 70°C on-off cycle 1,000hrs. | ±3% |
STANDARD RESISTANCE VALUES
E 24 Series
| 10 | 11 | 12 | 13 | 15 | 16 | 18 | 20 | 22 | 24 | 27 | 30 |
| 33 | 36 | 39 | 43 | 47 | 51 | 56 | 62 | 68 | 75 | 82 | 91 |
| Colour | lst figure | 2nd figure | Multiplier | Tolerance |
|---|---|---|---|---|
| Black | 0 | 0 | 1 | |
| Brown | 1 | 1 | 10 | ± 1% |
| Red | 2 | 2 | 100 | ± 2% |
| Orange | 3 | 3 | 1,000 | |
| Yellow | 4 | 4 | 10,000 | |
| Green | 5 | 5 | 100,000 | ± 0.5% |
| Blue | 6 | 6 | 1,000,000 | ± 0.25% |
| Violet | 7 | 7 | 10,000,000 | ± 0.1% |
| Gray | 8 | 8 | ||
| White | 9 | 9 | ||
| Gold | 0.1 | ± 5% | ||
| Silver | 0.01 | ± 10% |
Related products
WIRE WOUND RESISTORS – SILICONE COATED
The WWS series wire wound resistors are manufactured using high quality resistance wires wound on ceramic substrates. The resistors are coated using layers of Flame Proof Epoxy with axial lead wire. In WWS series, resistors up to 5W, the resistance value is color coded with 3 bands plus a tolerance band. An additional black band indicates that the resistor is wire wound. For resistors 6W and above, the value is printed on the resistor.
LOW OHM CURRENT SENSING RESISTORS OPEN FRAME
The WCSOA/WCSOR/WCSOV low ohm current sensing resistors are manufactured with high purity Ni-Cr/Cu-Ni element. These are open type resistors. WATTS offers these resistors ranging from 2mΩ to 20mΩ, having power rating from 2W to 10W.
- WCSOA is axial type resistor.
- WCSOR is radial pre-formed type resistor.
- WCSOV is PCB mounting shunt type resistor.
AUTOMOTIVE GRADE THICK FILM CHIP RESISTORS
The CR-A series Automotive Grade Thick Film Chip Resistors are manufactured by screening a metal glaze layer on a high grade ceramic body. The different resistance values are obtained by using different compositions of metal glaze. The end contacts are made to ensure optimum solderability and terminal strength. The resistive layers are given a non-flammable protective coating. The CR-A series is AEC-Q200 compliant.
The CR-A series offer a wide range of power ratings from 1/20W to 1W and are available in tolerance ranges of ±1% and ±5% with insulation Resistance ? 1000M?. Miniature size, excellent mechanical strength and electrical stability ensures reduced costs and enhances dependability.
ZERO OHM RESISTOR / JUMPER WIRE
The WC12/WC25/WM12/WM25 zero ohm resistors are manufactured to give extremely low resistance value. A single black band indicates that the resistor is Zero ohm. The WJ jumper wires are manufactured using high grade tin plated electrolytic copper wire. This is provided in taped form having 5mm pitch.
METAL GLAZE RESISTORS
The WMG Series Metal Glaze Resistors are manufactured with the latest sintering process to get the most stable thick metal glaze film. The resistors are insulated with light blue lacquer. WMG series offers a wide range of power rating (0.25W, 0.50W, 1W & 2W) in tolerance ±1% and ±5% with TCR less than 100 ppm/ºC
Reviews
There are no reviews yet.